Tuesday, November 19, 2019

Pure Competition & Monopolistic Competition Research Paper

Pure Competition & Monopolistic Competition - Research Paper Example A firm in a perfect competition shows complete elasticity to price fluctuations. Also, marginal revenues are equals to average revenues and market demands. It is the demand which causes shifts in average and marginal revenues in the short-run. Changes in market demand and supply lead to price fluctuations (Reynolds). 2.3Profit Maximization in the Short-Run For a firm in a pure competition, the difference between total costs and total revenues represent profits. For a firm to earn maximum profits, ability to control and react to marginal costs and revenue functions is important. If a firm can identify the level where marginal costs (MC) can be equals to marginal revenues (MR), profit can be maximized by increasing the output and number of units sold. It is important to note that in a short-run, Average revenue (AR) is equals to marginal revenue (MR) which also represents market price. Furthermore, the firm is intended to increase profits and not revenues. Therefore, a firm is required to produce and sell additional goods in order to reduce marginal costs (MC). The lower marginal cost would lead to lower average costs and the difference between average costs and revenues would indicate final profits of the firm. In short, if marginal costs (MC) are equals to marginal revenues, the firm is earning maximum profits. In a scenario where these two variables are equal or MR is higher than MC, the firm should produce more and vice versa (see Fig 1). In a short-run, the maximum loss that a firm can bear is its fixed cost.

Saturday, November 16, 2019

An alien species Essay Example for Free

An alien species Essay An alien species (also known as ‘exotic or nuisance species’) is the entry of any species into the ecology of which in the past it was not a part of. This species can travel to the new ecosystem from a neighboring ecosystem or from another part of the world. An alien species can cause damage or harm to animal, plant and human life thus completely disrupting the ecosystem. Two of the alien species that have seriously affected the other inhabitants of the ecosystem in the US and the other parts of North America include the Green crab and the zebra mussel. In the home ecosystem, an alien species may not be able to thrive well due to the presence of certain factors such as diseases, presence competitors, lack of space, natural enemies, etc. However in the new ecosystem, the alien species is able to thrive uncontrollable due to the absence or restrictive factors. In the past, many alien species have been introduced into various environments. Some have entered due to human factors, whereas other may have entered due to certain natural factors. Some species may have benefited the environment, which they are entered, whereas other may have seriously destroyed the native population. Invasion by alien species can have both, economic and environmental implications. The Zebra mussel is originally from the Caspian Sea and the Green crab is from Eastern Seaboard. These are classic examples of ‘Aquatic Nuisance Species’ (ANS) (ACS, 2007, MDNR, 2006 NOAA, 2007). The Zebra mussels were identified in the Great Lakes and later spread to the other parts of North America via the major rivers and waterways. They may have spread into the US from ships that have traveled through the freshwaters of Europe. They compete for plankton in the waters and in this way seriously jeopardize the food chain. They also damage parts of boats and ships. The Green crabs had spread into the San Francisco Bay region and later through California and Oregon States. They have a strong appetite for food in their territories and in this way deprive other organisms of food. The native crabs of US have seriously suffered from the invasion of the Green crab into their home territory (ACS, 2007, MDNR, 2006 NOAA, 2007).

Thursday, November 14, 2019

Computer Software Should be Free :: Internet Essays Papers

Computer Software Should be Free Free is a word that everyone in the world loves to hear, whether you are in the United States or Bangladesh. Usually when something is advertised as â€Å"free† there is some sort of a catch. Whether there are hidden shipping and handling fees or hidden commitments, something almost always gets you. The word free is not a word that is normally associated with computers and computer software, until now. If you know the right places to look on the Internet, whether legal or illegal, a person can find the software they are looking for. Considering that many things people want for their computer tend to be expensive this a great option for them. Organizations are trying to crack down on people getting things for free, but the Internet is too vast to regulate all of the sites that allow free usage of things normally paid for. Napster is a good example of a site that got shut down for allowing users to download music for free. Many views can be taken on whether or not this should be regulated. In this paper I will be discussing whether or not all things on the computer should be free. Software applications such as Microsoft Word and Microsoft Office can be expensive. So instead of buying them people go to websites and download them for free. This is a growing practice among many people in all countries. So it raises the question should all software be free. Many people argue that it should be free because everyone gets it for free anyway. Organizations like CAAST [1] and FAST [2] try to regulate the number of thefts in there countries. In Canada it has seemed to work over time, as numbers of thefts have dropped for the first time in four years. FAST reports that 26% of all software being used is illegal. These organizations can only hope to limit the number of illegal software downloads in their respective countries, which really is quite miniscule in the overall picture of software piracy. Music on the Internet is another big issue among consumers and the artists that compose them. Napster was the biggest site for downloading mp3’s, but was shutdown because of a big push by the rock group Metallica.

Monday, November 11, 2019

Comptuer Studies Ruby Notes

These are notes I took while I was learning Ruby. Comptuer studies ruby notes Instance of a class is a sub-category of that class. E. g. greyhound; dog. Every object has a class. Objects are instances of classes. Methods define what an object can do and properties describe it. Constants start with a capital letter, sometimes they are all caps e. g. INTEREST = 0. 012 #setting constant INTEREST to 1. 2% DOZEN = 12 #setting constant DOZEN to 12 Constants and variables store information in the memory for the duration of the use of the program.Like RAM? Constants can’t be changed but variables can be reassigned based on certain properties and data. Different types of classes: ClassExample of Object Float6. 5 or 3. 9 Fixnum2 or 3 StringThisisastring or randomnumber34 ArrayMonday Tuesday Wednesday Thursday Friday Or January February March April HashToronto [Dion Phaneuf] Pittsburgh [Sidney Crosby] Washington [Alex Ovechkin] Or Haseeb [November 18] Humza [August 6] Hana [August 11] Ra nge11.. 20 Or Hi.. Ho Float = decimal number Fixnum/Integer = whole number String = letters and numbersArray = an ordered list, a couple of objects put together in one list that can also be accessed independently Create a new array or reset an old one by using this: array = Array. new You can also show individual variables by doing: array[number] e. g. subjects[3] you can also add objects to the array by: subjects [4] = ‘Social Science’ Hash = Similar to array but not in order, each object does not have a number. It’s based on key and value pairs. Like if you put five names and assigned each a birthday. They would go based on those pairs. It assigns the first name to the second. E. g: friends = Hash. ew friends[‘Andrea'] = ‘July 22' friends[‘Mohammed'] = ‘April 9' Range = A sequence of values e. g. nums = 11.. 20 Setting variable: Fav_food = ‘pizza’ #setting variable fav_food to pizza The quote marks around pizza identify that fav_food is a string value. Identifiers are the constant/variables names In order to change a variable’s value (not class) from one to another use the following To string: x. to_s To float: x. to_f To integer/fixnum: x. to_i Keep in mind, this only changes the variables value based on class properties, not its actual class Scope is where the variable can be accessed r seen within a program. Some are only used for a small task while others may be used for larger tasks and appear several times within the program. Constants’ scope depends on how often it is declared. If a constant is only declared within a class or module it’s scope is within that scope or module. However if it is declared outside of that class or module it’s scope is wider or â€Å"global†. There four different variable scopes. Local variables are confined to the part of the program in which they are declared. If the variable is only declared within a method it is restricted to when that method is used or executed.It can’t be used anywhere else in the program. (e. g. fav_food) Global variables can be declared anywhere in the program and are accessible from anywhere in the program. They are identified by a preceding â€Å"$† e. g. $fav_food. Global variables, however have to be used with extreme caution due to the fact that their values can be changed anytime in the program, sometimes by accidental or careless coding, these accidents can cause huge problems and are not easily fixable. Class variables are confined to a specific class but once all instances of the class are created the value of the variable is shared amongst all instances.If the value is changed in one of the instances, it is changed in all of the instances. (e. g. @@fav_food) Instance variables are restricted to only certain instances of a class. If the value changes in one of the instances it stays the same in the others. (e. g. @fav_food) Commands to determine classes Either: put s variable. class or puts variable. kind_of? Class The first will tell you what class the variable is while the other will say true or false based on what class is inputted at the end of the line. Changing classes The easiest way is to just assign a new value to it.Another way is to use the to_s, to_i etc. commands while also using the â€Å"=† assignment operator in order to change the object’s class permanently e. g. num = num. to_s you can do it without the â€Å"=† and the num variable before the equals sign in order to change it temporarily All math operations are the same except for two. Modulo (%) Divides and gives the remainder and exponent is (**). E. g: X = 6%4 X = 20 ** 2 There are also comparison operators such as: puts a == b #false as a and b are not equal puts a ! = b #true as a and b are not equal puts a < b #returns true as b is larger puts a

Saturday, November 9, 2019

Bela Bartok (1881-1945) Hungarian Composer

As the tensions of war grew in Europe particularly in the Nazi-subjugated countries, the urge in Bartok to flee Hungary was overwhelming. The first thing he did was send his manuscripts out of Hungary and in 1940 he and his wife made their journey towards America, leaving their son Bela jr. , in Hungary. Though Bartok sought refuge in the United States and gained citizenship in 1945, he did not regard his journey as an exile, but rather an emigration.One of the pleasures that Bartok found in the United States was his privilege to study a compilation of the folk music of Serbia and Croatia at the prestigious Columbia University in New York City. During that time, there spread rumors that Bartok and his family were terribly destitute. However, this was not true for although they were not living a well-off life, he and his family lived decently. When Bela Bartok was diagnosed with leukemia, his hospital fees were shouldered by the American Society for Composers, Authors and Publishers.A nd in a gesture of goodwill, the conductor Serge Koussevitzky was convinced to have his foundation perform a Bartok piece through the conductor Fritz Reiner, and the culmination was the Concerto for Orchestra. IN 1944, Bartok wrote a solo violin sonata for the violinist Yehudi Menuhin, and last two concertos finished by Tibor Serly his Hungarian compatriot. Bartok’s works before his death in 1945 were branded as â€Å"the spirit of the times†. This and countless other bodies acclaimed his accomplishments and works. A large majority of his works was entered in several orchestral repertoires, and virtually all of them remained.Bartok not only left a Hungarian legacy but also, his contemporaries became proud of belonging in the same era as Bartok’s. Bela Bartok passed away peacefully on the 26th of September, 1945 in a hospital in New York. By his side was his wife Ditta Bartok and Bela jr. His remains were buried in New York’s Woodlawn Cemetery but were tra nsferred back to his native Hungary four decades later in 1988. Reference: Unitarian Universalist Historical Society (UUHS. (n. d. ). Bela Bartok. Retrieved June 24, 2007, from http://www25. uua. org/uuhs/duub/articles/belabartok. html

Thursday, November 7, 2019

Announcing the Worlds Ultimate Book Title Generator Reedsy

Announcing the Worlds Ultimate Book Title Generator Reedsy Announcing the World's Ultimate Book Title Generator Titling a book is a bit similar to picking a Fantasy Football team: you're never sure which one’s the perfect fit and you end up trashing sixty combinations in the end, anyway. But the good news is that you’re not alone if you’re stressed about your book title. Jane Austen’s Pride and Prejudice started out as First Impressions. Ernest Hemingway spent months discarding titles before deciding on A Sun Also Rises. Then there was George Orwell, who once planned to title the now-iconic 1984 as The Last Man in Europe. We’re familiar with the struggle, which is why we’re pleased to announce our book title generator: a resource for anyone who’s in need of some title inspiration. It’s got something for everyone, whether you’re dabbling in fantasy, mystery, romance, science fiction, and thriller. Best of all, it stores 10,000+ titles, so you’ll never run out of potential titles again!service@reedsy.com!Any questions about ti tling your book? Leave them in the comments below.

Tuesday, November 5, 2019

A Study On Gatt And WTO Economics Essay

A Study On Gatt And WTO Economics Essay In this section I will discuss what was GATT. GATT stands for General Agreement on Tariffs and Trade. Countries first signed this document in 1947. This agreement was designed to encourage free trade between member states. It encouraged free trade by regulating and reducing tariffs the countries imposed on tradable goods. It also provided an international forum to settle trade disputes. 110 countries have now signed on to GATT. GATT was in existence until 1995, when a new international governing body on international trade was created to replace it. This new organisation is the WTO. WTO In this section I will describe what the WTO is. The WTO stands for the World Trade Organisation. The WTO was created to replace the GATT. The Bretton Woods agreement of 1944 was created to help with the financial consequences of rebuilding Europe after World War Two. It would also try to ensure that major world depressions would not occur. The IMF and World Bank were created to help achieve this. Ho wever, an organisation to regulate trade between countries was also required. The GATT was initially set up, but the WTO was created in 1995 to succeed this. As it states on their own website (www.wto.org), ‘ the World Trade Organization (WTO) is the only international organization dealing with the global rules of trade between nations. Its main function is to ensure that trade flows as smoothly, predictably and freely as possible.’ The WTO has nearly 150 members. Trade between these members accounts for 97% of the worldwide trade. How does the WTO work? In this section I will describe how the WTO operates and who the members are. The main point to note about the WTO is that it does not set rules on its own. This makes it different from the other two organisations set up by the Bretton Woods agreement. The WTO is more of an international forum where trade negotiations are discussed. It then ensures that outcome of the negotiations are undertaken. The WTO has many member states. Each state has a representative that sits on the council. Each representative has only one vote when it comes to decisions. This is different to the IMF as on the IMF the more powerful, developed countries have greater power. The one vote to one member policy that the WTO has is designed to ensure greater fairness with regards to trade negotiations. However, in the past, Europe, USA and Japan have dominated. This domination is to be upset with the introduction of China into the WTO. This will now mean that the developing world has a major voice at trade negotiations. The process of decision-making is undertaken by all member states. All members vote on specific decisions and the outcome of negotiations are usually by consensus. A majority vote can also be used, but this is extremely rare. Below this level are numerous specialised committees, working groups and working parties that deal with individual agreements and various other areas concerned with environment, developm ent, membership applications and regional trade agreements. What does the WTO do?